ICF construction contractors & self-build shells in Ireland

Insulated Concrete Formwork (ICF) one-off houses, structural shell packages (€55,000–€125,000), turnkey A1-BER homes (€2,350–€3,100/m²), fast kitchen extensions and BS 8102 waterproof basements — delivering 0.11–0.15 W/m²K U-values and <0.6 ACH airtightness across Dublin, Cork, Galway, Meath, Kildare, Wicklow, Limerick and all 26 counties.

Free, no obligation. One experienced ICF contractor covering your county replies, not five.

  • €55,000 to €125,000for an engineered ICF structural shell (raft, poured ICF walls, upper floor & roof)
  • €2,350 to €3,100/m²turnkey A1-rated ICF house build cost in Ireland (€280,000–€550,000+)
  • 0.11 to 0.15 W/m²Kcontinuous EPS insulated wall U-values with <0.6 ACH airtightness
  • 2 to 3 weekstypical ICF wall erection & concrete pour to roof plate in damp Irish weather

From Structural Shell to Turnkey Finish: How Irish ICF Homes & Extensions Come Together

Monolithic reinforced concrete poured inside continuous twin-leaf EPS insulation — rapid shell erection in damp weather followed by crisp silicone render, triple glazing and A1-rated interiors.

Structural shell erection stage before external render and glazing
Completed crisp rendered gable with full-height triple-glazed windows
One-Off ICF House Shell to Weathertight · €55k–€125k Shell. Monolithic 150mm C30/37 concrete core poured in 2–3 weeks, finished in breathable mesh-reinforced silicone render.
Plastered extension shell with roof windows and garden glazing
Completed open-plan kitchen living extension with rooflights
Airtight ICF Kitchen Extension · €2,500–€3,350/m² Turnkey. Zero thermal bridging around wide sliding-door openings with rapid hot-knife M&E chasing and underfloor heating.
Scaled architectural floor plans and structural engineering takeoff
Bright finished room with timber floor and tall glazed garden doors
Drawing Takeoff to Passive-Ready Home · 0.11–0.15 W/m²K. Engineered lintel rebar schedules, insulated EPS raft junctions and blower-door verified airtightness.

Three steps from planning drawings to a poured, airtight ICF structure

  1. Check your shell & turnkey budgetUse the interactive ICF cost calculator below to compare shell-only, weathertight and turnkey budgets for 0.15 W/m²K NZEB or 0.11 W/m²K Passive wall specs.
  2. One experienced ICF contractor contacts youWe pass your enquiry to one specialist ICF contractor covering your county — never to a multi-builder bidding directory.
  3. Drawing takeoff, engineering spec & written quoteThe contractor reviews your plans, calculates EPS block quantities, rebar lintels and concrete pump pours, and provides a clear itemised quotation.

Calculate your ICF shell & turnkey build cost

Select your approximate floor area, whether you want an ICF structural shell or a complete turnkey build, and your target wall U-value specification.

1. Building type & floor area
2. Build stage required
3. Insulation & U-value target

Estimated 2026 guide price (incl. 13.5% VAT)

€62,000 to €84,000

3–4 Bed One-Off ICF House (150 m²) · ICF Structural Shell Package · Standard NZEB Graphite EPS (0.14–0.15 W/m²K)

2026 Irish guide range for a 3–4 bed one-off icf house (150 m²) built to icf structural shell package (€62,000 to €84,000), including NSAI/ETA certified graphite EPS forms, B500B steel reinforcement, concrete pump, C30/37 structural concrete and 13.5% VAT.

Request an itemised ICF quote

Get an ICF shell or turnkey quote for your build

Select your project type, planning stage and county. Your enquiry goes to one experienced ICF contractor covering your county, who reviews your drawings, specifies block thickness and concrete core, and quotes in writing.

What do you need built?

Pick the closest match.

ICF construction guides, U-values & 2026 price breakdowns

Straight answers to what homeowners ask most: itemised 2026 costs, material specifications, drainage & planning rules, and what to check before you book.

Cost & Shell PricingICF house build cost in Ireland (2026 price guide)Itemised 2026 Irish ICF prices: wall superstructure €210–€310/m² wall area, structural ICF shells €55,000–€125,000, and turnkey A1-rated homes €2,350–€3,100/m² (€280,000–€550,000+).Read the guide →One-Off Homes & BCAROne-off ICF houses & self-build packagesRural and suburban one-off ICF homes erected from insulated raft foundation to roof plate in 2–3 weeks — NSAI Agrément / ETA certification, mortgage stage drawdowns and BCAR sign-off.Read the guide →Build System ComparisonICF vs cavity block vs timber frame in IrelandSide-by-side 2026 comparison of Irish build costs, U-values (0.11–0.15 W/m²K), airtightness (<0.6 ACH), wet-weather site speed, acoustic soundproofing (Rw 52–58 dB) and thermal mass.Read the guide →Extensions & RenovationsICF house extensions & wraparound buildsFast, clean single-storey and two-storey ICF kitchen extensions (€2,500–€3,350/m² turnkey or €18,000–€38,000 structural shell) with slim wall footprints in damp Irish weather.Read the guide →Basements & Split-LevelsICF basements, split-level homes & retaining wallsReinforced 200mm concrete-core ICF basements and split-level hillside houses engineered to BS 8102 Type A + Type B waterproofing standards (€2,900–€4,100/m²).Read the guide →U-Values & AirtightnessPassive House & NZEB compliance with ICFAchieving 0.11–0.15 W/m²K U-values, <0.6 ACH @ 50 Pa airtightness, thermal-bridge-free EPS junctions, triple-glazed window buck detailing, MVHR and A1 BER ratings.Read the guide →Guides & Calculator HubICF Construction Ireland guides, calculator & referenceAll ICF construction guides in Ireland: 2026 shell and turnkey costs, interactive m² calculator, ICF vs cavity block vs timber frame, extensions, basements, Passive House specs and all 26 counties.Read the guide →Technical ReferenceICF Construction Ireland glossary of terms & specificationsPlain-English engineering glossary of 15 Insulated Concrete Formwork (ICF), U-value, airtightness, waterproofing and Irish BCAR terms.Read the guide →

More guides & resources: All guides & calculator hub · Technical & trade glossary · Frequently asked questions · All areas covered · Editorial standards · Contact · About this site

Common questions before building with ICF

How much does it cost to build an ICF house in Ireland in 2026?

In 2026, erecting an ICF wall superstructure (interlocking graphite EPS blocks, steel rebar, alignment bracing, pump hire and C30/37 structural concrete) costs €210 to €310 per m² of wall area. A complete ICF structural shell package — insulated raft foundation, poured ICF ground and first-floor walls, precast hollowcore or posi-joist upper floor and roof structure — typically ranges from €55,000 to €125,000 depending on footprint. Full turnkey A1-BER one-off ICF houses cost €2,350 to €3,100 per m² (€280,000 to €550,000+ including 13.5% construction VAT).

Is ICF construction cheaper or more expensive than traditional cavity blockwork in Ireland?

At raw shell stage, ICF walls typically cost 3% to 7% more in materials than standard 100mm + 150mm cavity blockwork, or roughly break even once wide-cavity full-fill bead plus internal insulated dry-lining and airtightness parge coats are priced on a block house. Because ICF walls go up in 2 to 3 weeks regardless of light rain, require less scaffolding hire, achieve 0.11–0.15 W/m²K out of the box, and allow smaller heat-pump sizing, total turnkey costs to Passive/A1 standard are regularly comparable to or lower than cavity block.

Can you get a mortgage, HomeBond warranty and BCAR sign-off for an ICF house in Ireland?

Yes. Mainstream Irish mortgage lenders (AIB, Bank of Ireland, PTSB and EBS), structural warranty providers and BCAR Assigned Certifiers accept ICF builds provided the block system holds a valid NSAI Agrément certificate or European Technical Assessment (ETA / CE mark), the concrete core and reinforcement schedule are signed off by a Chartered Structural Engineer (MIEI / MIStructE), and poured lifts are inspected before closing.

What U-values and airtightness ratings do ICF walls achieve?

Standard dual-100mm graphite-enhanced EPS ICF blocks poured with a 150mm reinforced concrete core deliver a wall U-value of 0.14 to 0.15 W/m²K — comfortably beating Ireland's NZEB Part L wall requirement (0.18 W/m²K). Upgrading the outer EPS leaf to 150mm–200mm lowers the U-value to 0.11 W/m²K for certified Passive House projects. Because the poured concrete core forms a continuous, joint-free structure, blower-door tests routinely record <0.6 ACH @ 50 Pa when paired with taped window bucks and MVHR.

How are external render, natural stone and internal plasterboard fixed to ICF blocks?

Externally, ICF blocks accept breathable polymer-modified fibreglass-mesh basecoats and flexible silicone or acrylic thin-coat renders (€75–€115/m²) directly onto the keyed EPS face, or natural Irish stone/brick slips on certified mechanical fixings or an outer masonry leaf. Internally, high-strength polypropylene web ties moulded every 150mm–200mm inside the EPS provide solid pull-out strips (~40mm wide) for screwing 12.5mm fire-rated plasterboard directly to the wall, while electrical conduits and plumbing chase neatly into the internal EPS with a hot-knife before boarding.

Why is ICF faster than blockwork in wet Irish weather?

On exposed sites from Donegal and Mayo to Cork, Kerry and Wicklow, traditional blocklaying stops during heavy rain because saturated mortar joints wash out and slump above 4–5 courses per day, and wet cavities trap moisture. Interlocking EPS ICF forms do not absorb rainwater, stack rapidly like precision building blocks with rebar tied inside, and are poured floor-height in a single afternoon via boom concrete pump — cutting superstructure time from months to 2–3 weeks.

ICF construction contractors across all 26 counties

Enquiries from all 26 counties go to one experienced ICF construction specialist covering your county — from Dublin, Cork, Galway and Meath to Kildare, Wicklow, Limerick, Wexford and Donegal. Pick your county below for local CSO one-off build stats, Met Éireann wet-weather build notes and 2026 ICF prices. Compare all areas covered →

Have floor plans or pricing an ICF self-build or extension?

One experienced ICF contractor covering your county reviews your architectural drawings, calculates EPS block U-values, rebar and concrete volumes, and provides a written itemised quote.